Bringing You the Best in Ceramic Tile

Wall Tile
Ceramic wall tiles are normally less durable than tile designed specifically for flooring. Most wall tile is glazed with a semi-gloss or matte surface. The glazed surface has a very low slip resistance and becomes slippery when wet. Therefore, glazed wall tile is much more suited for wall or countertop applications rather than floors.

Glazed Ceramic Tile
Glazed ceramic tile is comprised of 2 basic elements, clay and water. Various clays are mined, ground, and blended to a fine powder, and pressed together to form the body of the tile. The pressed clay body is then dried to reduce the moisture content. Next, the surface of the tile is coated with a colored glaze (similar to glass). The glaze is then permanently fused to the surface of the tile by firing it in kilns at approximately 2,000° Fahrenheit, to form the finished product.

Porcelain Tile
Porcelain tile is made from a blend of fine-grain clays and other minerals to produce a very dense body, which makes it highly resistant to moisture, staining, and wear. Because of these features, porcelain tile will withstand years of heavy foot traffic in both interior and exterior applications while maintaining its color and beauty.

Thru body Porcelian
This is the densest of all tile types. ColorBody™ Porcelain Tile has a through-color body and is defined by its <0.5% water absorption. These tiles can withstand heavy foot traffic and are suitable for both indoor and outdoor applications. To determine the overall performance and durability of the glazed surface of ceramic tile, there are standardized industry tests and classifications, which rate tile's specific resistance to scratching, breaking, abrasion, moisture, etc.

Durability
The durability of ceramic tile is ranked using a grade system. The lowest grade of strength being grade I and the hardest level of strength would be grade V. Durability wise, a grade III or higher glazed ceramic tile is an excellent solution for flooring in any home for many reasons: it is very strong and will most likely outlast any flooring product in the market if installed properly and maintained.

Scratch Resistance–Tiles are rated for hardness or scratch resistance using the MOHS Test and rating system. The MOHS test rates tile from 1 (softest) to 10 (hardest). Ceramic tile with a value of 5 or more is suitable for most residential floor tile applications. Tile with a value of 7 or higher is normally acceptable for most commercial applications or heavy traffic areas.

Wear Rating–To help select suitable tiles for specific applications, tiles are rated the P.E.I. (Porcelain Enamel Institute) scale. The tiles are evaluated for wear resistance on a scale from 1 (lowest) to 5 (highest):

• PEI 1: Light Traffic - Recommended for residential bathrooms or other areas with light traffic and where shoes are not frequently used.
• PEI 2: Medium Traffic - Recommended for residential interiors, except entryways, kitchens, stairs, or any area where tiles may come into
  contact with gravel or sand.
• PEI 3: Medium-Heavy Traffic - Recommended for all residential interiors and light commercial applications. Not recommended for
  commercial entryways.
• PEI 4: Heavy Traffic - Suitable for all residential interiors and most commercial applications, including shopping malls and public areas.
• PEI 5: Heavy-Plus Traffic - All residential and commercial areas where heavy-duty wearability is needed.